The BPF 900/9 is a 9-resonator, interdigital band-pass filter for
multichannel systems in the 900 MHz band.
Using interdigital principles the following features are obtained at the
same time:
Wide Pass Range
Low insertion loss and ripple inside pass range
Steep slopes immediately outside pass range
Heavy attenuation outside the pass range.
The BPF 900/9 housing is made of silvered brass. Careful design and
choice of materials ensure a long lifetime and reliable operation over a
wide temperature range.
The filter can be delivered with centre frequency between 880 and
960 MHz. The specifications and the curves below refer to a filter with
35 MHz port width, but interdigital filters with other port widths and
filter characteristics may be quoted on request.
ORDERING DESIGNATIONS
TYPE PRODUCT NO. TUNING RANG
BPF 900/9L 200000953 880 - 915 MHz
BPF 900/9H 200000952 925 - 960 MHz
SPECIFICATIONS
ELECTRICAL
FILTER TYPE Interdigital band-pass filter
TUNING RANGE To be stated within 880 - 960 MHz
MAX. INPUT POWER 100 W
INSERTION LOSS ≤ 1.0 dB
BANDWIDTH 35 MHz
ATTENUATION AROUND PASSBAND
± 25 MHz rel. fc : > 30 dB
± 45 MHz rel. fc : > 80 dB
ATTENUATION OUTSIDE PASS-RANGE,
0-2 GHz
> 73 dB, typ. > 100 dB
(see curves)
IMPEDANCE Nom. 50 Ω
SWR ≤ 1.5
MECHANICAL
TEMP. RANGE –30° C → +60° C
FREQ. STABILITY Approx. 8ppm/° C
CONNECTORS N-female
DIMENSIONS (L x W x H) 332 x 110 x 30 mm
WEIGHT Approx. 2.5 kg
TYPICAL RESPONSE CURVES
Kommentare zu diesen Handbüchern