Procom CXL 70-8HD-... Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kommunikationszubehör Procom CXL 70-8HD-... herunter. Procom CXL 70-8HD-... User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
CXL 70-8HD/...-PT
Sturdy, 8 dBd, Omnidirectional Base Station Antenna for the
450 MHz Band
DESCRIPTION
CXL 70-8HD/…-PT is an 8 dBd, vertically polarized, omnidirectional base
station antenna for the 450 MHz band.
The antenna has a bandwidth of 20 MHz. Please specify centre
frequency or duplex TX and RX when ordering.
The antenna has been approved to withstand lightning (10/350 μs
impulses/100 kA) according to EN 61643-11, VDE 0855-300 and VDE
0185-305-114 in FH-Kiel Laboratory in Germany.
The antenna is provided with our sturdy type “HD” mast mount, which is
a heavy-duty, multipurpose mounting bracket made of non-corrosive
aluminium. The accompanying U-bolts and fittings are made of stainless
steel.
The antenna can be mounted on mast tubes of 58 to 105 mm in outer
diameter. Further, the construction of the mount makes it possible to
lead the cable either along the inside oron the outside of the mast tube.
In designing this antenna special emphasis has been laid on obtaining a
large bandwidth both in relation to SWR and gain, making this antenna
highly suitable for duplex operation with large spacing between the TX
and RX frequencies. The phasing of the radiating elements is carefully
adjusted to yield maximum gain in the horizontal plane, with the level of
the sidelobes reduced to a minimum.
The antenna element is sealed in a high-quality, conical glass fibre tube
with low wind-load, which will ensure performance undisturbed in all
climates.
To substantially reduce noise caused by atmospherical discharges, all
metal parts in the antenna are DC-grounded. Consequently, the antenna
shows a DC-short across the coaxial cable.
CXL 70-8HD/…-PT is a vibration-proof, slim-line, corrosion-resistant,
modern style base station antenna.
The CXL 70-8HD/... PT can be ordered on other frequencies on request.
ORDERING DESIGNATIONS
TYPE FREQUENCY PRODUCT NO.
CXL 70-8HD/L-PT 380 - 395 MHz
CXL 70-8HD/H-PT 410 - 430 MHz
CXL 70-8HD/LM-PT 425 - 445 MHz
CXL 70-8HD/HM-PT 440 - 460 MHz
SPECIFICATIONS
ELECTRICAL
MODEL CXL 70-8HD/...-PT
ANTENNA TYPE High-gain collinear
FREQUENCY 20 MHz wide frequency segments within the
380 - 470 MHz range.
IMPEDANCE Nom. 50 Ω
RADIATION Omnidirectional
POLARIZATION Vertical
GAIN 10 dBi 8 dBd
HALF POWER BEAMWIDTH 12°
BANDWIDTH 20 MHz
SWR ≤ 1.5
MAX. POWER 250 W
ANTISTATIC PROTECTION All metal parts DC-grounded
(Connector shows a DC-short)
MECHANICAL
TEMP. RANGE -30°C → +70°C
CONNECTOR N-female
WIND SURFACE 0.29 m² / 3.12 feet²
WIND LOAD 368 N @ 160 km/h
WIND VELOCITY Tested to 200 km/h
COLOUR Marine white
MATERIALS Radome: Polyurethane-coated glass fibre
Mounting bracket: Seawater resistant aluminium,
polyester coated
TOTAL HEIGHT Approx. 5.3 m / 208.66 in (Dep. on frequency)
WEIGHT Approx. 9 kg / 18.84 lb
MOUNTING On 58 - 105 mm / 2.28 - 4.13 in dia. mast tube
MULTI-PURPOSE MOUNTING BRACKET
PLEASE NOTE
When using the CXL 70-8HD/…-PT at windy locations where wind speeds of
more than (e.g. 150 km/h) can be expected, the antenna must be mounted
on the side of the mast and the top section of the glass fibre tube stabilized
with a bracket. For this purpose the Fixatid Bracket FB-HD/78 with the
slideable side mounting Arms (SMC) can be used.
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - CXL 70-8HD/...-PT

CXL 70-8HD/...-PTSturdy, 8 dBd, Omnidirectional Base Station Antenna for the450 MHz BandDESCRIPTIONCXL 70-8HD/…-PT is an 8 dBd, vertically polarized,

Seite 2 - TYPICAL GAIN AND SWR CURVES

TYPICAL GAIN AND SWR CURVESTYPICAL RADIATION PATTERN (E-PLANE)TYPICAL RADIATION PATTERN (H-PLANE)PROCOM A/S reserve the right to amend specificationsw

Kommentare zu diesen Handbüchern

Keine Kommentare