Procom MHU 3-X Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kommunikationszubehör Procom MHU 3-X herunter. Procom MHU 3-X User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
MHU 3-X
Dual-Frequency Mobile Antenna for the 160 and 450 MHz
Bands
DESCRIPTION
Field-tunable dual-frequency antenna which makes it possible to:
- operate 160 and 450 MHz transceivers alternately on the same
antenna
- operate two transceivers (160 and 450 MHz) at the same time on one
antenna using a diplexer (type DIPX 225/330 – must be ordered
separately).
Only a single hole has to be drilled instead of two.
Car appearance is not destroyed by an “antenna farm”.
Ideal for covert services.
Stainless steel X-mount with M6-thread whip-fastening system.
Simple mounting exclusively with access from the outside.
Choice between two connection principles:
X-mount: FME-connection (supplied without cable).
XP4-mount: Permanently attached 4 m cable terminated with FME-
connector.
ORDERING DESIGNATIONS
TYPE NO. PRODUCT NO. MOUNT VERSION
MHU 3-X 130000770 X-mount (oblong) with FME-system
MHU 3-CX 130000771 CX-mount (circular) with FME-system
MHU 3-XP4 130000776 XP4-mount (oblong) with 4 m cable
and FME-connector
MHU 3-CXP4 130000772 CXP4-mount (circular) with 4 m cable
and FME-connector
SPECIFICATIONS
ELECTRICAL
MODEL MHU 3-X
ANTENNA TYPE Dual-frequency mobile antenna
FREQUENCY 160 MHz frequency within:
140 – 170 MHz
450 MHz frequency within:
400 – 480 MHz
IMPEDANCE Nom. 50 Ω
POLARIZATION Vertical
GAIN 160 MHz: 0 dB
450 MHz: 3 dB
BANDWIDTH 160 MHz: ≥ 4 MHz @ SWR ≤ 2.0
450 MHz: ≥ 24 MHz @ SWR ≤ 2.0
SWR ≤ 1.5 @ f. res.
MAX. POWER 100 W
MECHANICAL
MATERIALS Whip:
Black-chromed stainless steel and
brass
Mount:
Black-chromed brass
Weather- and shockproof plastics
Stainless steel
RECOMMENDED INSTALLATION
TORQUE
4 ± 1 Nm
COLOUR Black
HEIGHT Approx. 56 cm
WEIGHT X-version: Approx. 170 g
XP4-version: Approx. 320 g
MOUNTING 18 mm dia. hole
OPERATION USING A DIPLEXER
In case of operating two transceivers on one antenna at the same time, a
diplexer, type DIPX 225/330 is necessary to complete the system. The tasks
of the diplexer are to protect the two receiver inputs from being destroyed
by the transmitter in the contrary band, and to ensure a low-loss path
between the transceiver and the antenna, which is not loaded by the other
branch. For further details please see the separate data sheet on the DIPX
225/330. The diplexer fully covers both bands and, consequently, tuning to
specific frequencies is not required.
COUPLING DIAGRAM
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1

MHU 3-XDual-Frequency Mobile Antenna for the 160 and 450 MHzBandsDESCRIPTIONField-tunable dual-frequency antenna which makes it possible to:- operate

Seite 2 - 25/11/11

PLEASE NOTEWith this type of combination antenna only certain frequenciesfrom thesegments 140 - 170 MHz and 400 - 480 MHz can be covered at the sameti

Kommentare zu diesen Handbüchern

Keine Kommentare