Procom SMC-500---smc-1000 Bedienungsanleitung PDF herunterladen

SMC 500 / SMC 1000

Side-Mounting Brackets for Base Station Antennas

DESCRIPTION

These side-mounting brackets are used when a base station antenna

has to be side-mounted on the supporting lattice mast or mast tube.

The SMC 500 has a side-mounting distance of approx. 0.5 m and the

SMC 1000 a side-mounting distance of approx. 1.0 m.

Both types can be supplied with U-bolts either for masts with diameter

15 – 65 mm (typical: lattice mast legs) or for mast tubes with diameter

between 65 and 105 mm. (See table below).

The brackets are mainly intended for all the omnidirectional antennas

provided with type “C” or “LW” clamp, but can also readily be used

together with all “GP”-antennas for 38 mm mast tubes or for carrying

directional antennas.

The brackets are made of hot-dipped galvanized steel and all

accompanying fittings are in stainless steel.

DIMENSIONS

ORDERING DESIGNATIONS

TYPE PRODUCT NO. FOR MAST

DIAMETER

FITTINGS

SUPPLIED

SMC 500/15-65 100000049 15 - 65 mm 2 pcs. 65 mm U-bolts

8 pcs. M8 nuts

and 4 washers

SMC 500/65-105 100000048 65 - 105 mm 2 pcs. 105 mm U-bolts

8 pcs. M10 nuts

and 4 washers

SMC 1000/15-65 100000045 15 - 65 mm 2 pcs. 65 mm U-bolts

8 pcs. M8 nuts

and 4 washers

SMC 1000/65-105 100000051 65 - 105 mm 2 pcs. 105 mm U-bolts

8 pcs. M10 nuts

and 4 washers

SPECIFICATIONS

APPLICATION BRACKETS FOR SIDE-MOUNTING

DISTANCE: MAST SURFACE

TO ANTENNA CENTRE

SMC 500: Approx. 570 mm

SMC 1000: Approx. 1025 mm

WIND SURFACE SMC 500: 0.027 m²

SMC 1000: 0.046 m²

WIND LOAD SMC 500: 34 N @ 160 km/h

SMC 1000: 58 N @ 160 km/h

WEIGHT SMC 500: Approx. 3.6 kg

SMC 1000: Approx. 4.7 kg

PLEASE NOTE

The optimum position for an omnidirectional antenna is at the top of the

mast as this ensures undisturbed radiation in all horizontal directions.

Mounting of an omnidirectional antenna at the side of a mast imposes some

distortion of the radiation pattern as well as the SWR. The influence is

dependent on the distance to the mast and the mast diameter.

Often this effect can be advantageously exploited to create directional

patterns when a certain “preferred area” has to be covered by the antenna

system.

PROCOM A/S reserve the right to amend specifications

without prior notice.

06/12/11

SMC 500 / SMC 1000 1

Inhaltsverzeichnis

Seite 1 - SMC 500 / SMC 1000

SMC 500 / SMC 1000Side-Mounting Brackets for Base Station AntennasDESCRIPTIONThese side-mounting brackets are used when a base station antennahas to b

Kommentare zu diesen Handbüchern

Keine Kommentare

Procom SMC-500---smc-1000 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kommunikationszubehör Procom SMC-500---smc-1000 herunter. Procom SMC-500---smc-1000 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kommunikationszubehör Procom SMC-500---smc-1000