Procom PC36VFC Spezifikationen Seite 1

This firebox has been tested and approved under ANSI Z21.91 for use with any ANSI Z21.11.2 approved gas logs. – Do not store or

10 NOTE: When fireplace is installed directly on carpeting, tile or other combustible material, other than wood flooring, the fireplace must be inst

11 IMPORTANT: When finishing your firebox, Combustible materials such as wall board, gypsum board, sheet rock, drywall, plywood, etc, must have ½

12 INSTALLING GAS LINE NOTI CE: A qualified service person must connect heater to gas supply. Follow all local codes. IMPORTANT: See Connecting to

13 REPLACEMENT PARTS NOTE: Use only original replacement parts. This will protect your warranty coverage for parts replaced under warranty. PARTS

14 PARTS LIST This list contains replaceable parts used in your fireplace. When ordering parts, follow the instructions listed under Replacement Pa

2 TABLE OF CONTENTS Important Safety Information...

3 IMPORTANT SAFETY INFORMATION IMPORTANT: Read this owner’s manual carefully and completely before trying to assemble, operate, or service thi

4 1. Do not place Propane/LP supply tank(s) inside any structure. Propane/LP supply tank(s) must be placed outdoors. 2. Do not use this firebox a

5 This fireplace is designed for vent-free operation. State and local codes in some areas prohibit the use of vent-free fireplaces. State of Massa

6 AIR FOR COMBUSTION AND VENTILATION WARNING: This fireplace should not be installed in a confined space or unusually tight construction unless p

7 2. Divide the space volume by 50 cu. ft. to determine the maximum BTU/hr the space can support. __________(Volume of space) ÷ 50 cu. ft. = (Maxi

8 Ventilation Air from Inside Building This fresh air would come from adjoining unconfined space. When ventilating to an adjoining unconfined sp

9 INSTALLATION NOTICE: This fireplace is intended for use as supplemental heat. Use this fireplace along with your primary heating system. Do not