Procom PCSD25T Installationsanleitung PDF herunterladen (Seite 15)

WARNING: Failure to position the parts in accordance

with these diagrams or failure to use only parts included

may result in property damage or personal injury.

CAUTION: After installation, and periodically thereafter,

check to ensure that no flame comes in contact with any

log. With the heater set to high, check to see if flames

contact any log. If so, reposition logs according to the log

installation instructions in this manual. Flames contacting

logs will create soot.

Figure 13 - Installing Log Set

IMPORTANT: Make sure log does not cover any

burner ports (see Figure13). It is very important to install

the logs exactly as instructed. Do not modify logs. Use

only logs supplied with heater.

STEP 1: Remove nylon ties connecting the packing

material to the logs. Check to be sure that

the pins on logs 3, 4 and 8 are securely

placed in the mounting holes located on

the mounting panel of the gas stove burner

assembly.

ll logs

STEP 2: Insert the recessed hole on the bottom of log 5 onto

pin on log 1, with the other end placed on log 3.

Install the log 6 onto the log 1 and 2.

Insert the recessed holes on the bottom of log 7 onto

pins on log 1, with the other end placed on log 8.

INSTALLATION Continued INSTALLING LOGS

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 30 31

Keine Kommentare

Procom PCSD25T Installationsanleitung Seite 15