Procom VOR/ILS Analyzer EVS200 Bedienungsanleitung PDF herunterladen (Seite 51)

VOR/ILS Analyzer EVS200

0796.1800.02 E-8 42

Chapter 3: Operation

Command FA0

command function

FA0 <fast DDM measuring off> deactivating the fast DDM measurement

The command FA0 switches off the fast DDM measurement.

Example:

command from the controller

response of the VOR/ILS Analyzer EVS200

input:

FA0 <CR>

fa0 <CR>

READY <CR/LF>

Command D1

command function

D1 <display information> switch over to display1

The command D1 enables the switching over to the content of display1 in the VOR / ILS mode.

This is prediction for reading out the data of the corresponding mode (VOR/ILS).

Example:

command from the controller

response of the VOR/ILS Analyzer EVS200

input:

D1 <CR>

d1 <CR>

READY <CR/LF>

Command D2

command function

D2 <display information> switch over to display2

The command D2 enables the switching over to the content of display2 in the VOR / ILS mode.

This is prediction for reading out the data of the corresponding mode (VOR/ILS).

Example:

command from the controller

response of the VOR/ILS Analyzer EVS200

input:

D2 <CR>

d2 <CR>

READY <CR/LF>

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 67 68

Keine Kommentare

Procom VOR/ILS Analyzer EVS200 Bedienungsanleitung Seite 51