Procom VOR/ILS Analyzer EVS200 Bedienungsanleitung PDF herunterladen (Seite 55)

VOR/ILS Analyzer EVS200

0796.1800.02 E-8 46

Chapter 3: Operation

Command D2

command function

D2 <Display-information> switching over to Display2

The command D2 enables the switching over to the content of display2 in the VOR / ILS mode.

This is the prediction for reading out the data of the corresponding mode (VOR/ILS).

Example:

command from the controller

response of the VOR/ILS Analyzer EVS200

input:

D2 <CR>

d2 <CR>

READY <CR/LF>

Command AF8

command function

AF8 <AF-frequency ID> AF-frequency ID query

The command AM8 reads the actual AF frequency (ID) in the ILS / VOR mode.

Prediction for reading out the data of the corresponding mode (VOR/ILS) is the

switching over to display2.

Example:

command from the controller

response of the VOR/ILS Analyzer EVS200

query:

AF8 <CR>

af8 <CR>

e.g. 1020.0Hz <CR/LF>

Command AM8

command function

AM8 <AM-modulation depth (ID)> query of AM-modulation depth (ID)

The command AM8 reads the actual AM-modulation depth (ID) in the ILS / VOR mode.

Prediction for reading out the data of the corresponding mode (VOR/ILS) is the

switching over to display2.

Example:

command from the controller

response of the VOR/ILS Analyzer EVS200

query:

AM8 <CR>

am8 <CR>

e.g. 10.0% <CR/LF>

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 67 68

Keine Kommentare

Procom VOR/ILS Analyzer EVS200 Bedienungsanleitung Seite 55